Archives

Stylish and Unique Headband for Less

I must admit I had an awesome time creating this “blinged” headband. The headband is created using two colorful scouring pads that I found at the Dollar Store!scouringpadheadband_final_22-289x300 I really enjoy making “Bows For Less” style crafts. I love using an inexpensive product to make something unique, beautiful, and completely out of the ordinary. I find myself scouring (pun intended)the aisles at discount stores and Dollar Stores looking for that perfect something. The other day I came across these really pretty scouring pads that were being sold two for a dollar. They are made of plastic woven strands and have absolutely no metal in them, they also do not smell or have any soap added to them. They are just plain plastic scouring pads.

scouringpadheadband_1-300x225

Materials and tools you will need for this craft:

Instructions:

1. To being cut the very top inner circle of the scouring pad to open it up. Next, unroll the insides you are left with a large sleeve. Trim away the circle and keep the long sleeve intact.

DSCN1511-300x225

2. Next, flatten out the mesh sleeve. Place a large width headband in the center (I used one I found at the Dollar Store.)

scouringpadheadband_2-300x225

3. Using embroidery thread sew the sides of the sleeve together tightly with the headband inside. Start sewing at the center.

scouringpadheadband_3-300x225

4. When you reach the thinner ends of the headband pull the mesh tighter and overlap each end. Continue sewing all the way to bottom of the headband.

scouringpadheadband_4-300x225

5. Start in the center and sew the plastic mesh together on the other side. Then trim the mesh at the bottom of the headband and add some dabs of hot glue.

scouringpadheadband_5-300x225

6. Fold some ribbon over the ends and hot glue it in place.

scouringpadheadband_6-300x225

7. Wrap ribbon completely around the ends and hot glue it in place for a nice finished look.

scouringpadheadband_7-300x225

8. Use the Mini Bowdabra and Hair Bow Tool & Ruler to create a fun bow. I made a 4? Boutique Bow, added some scrap ribbon strands, and scraps of plastic mesh from the other colored scour for the center of the bow

scouringpadheadband_9-300x225

9. Finish the bow by scrunching down the bow with the Mini Bowdabra Wand. While the bow is still in the Mini Bowdabra, thread the two loose ends of the Mini Bowdabra Bow Wire through the loop at the other end. Pull the Bowdabra Bow Wire tightly while the bow is still in the Mini Bowdabra. Gently pull the bow out of the Mini Bowdabra. Separate the two loose ends of the Bowdabra Bow Wire and bring them around to the back of the bow and knot. Fluff bow.

scouringpadheadband_12-300x225

10. Next, I trimmed away the extra Bowdabra Bow Wire and used embroidery thread and needle to attach the bow to the plastic mesh headband.

scouringpadheadband_13-300x225

11. Add a few extra dabs of glue to the back of the bow and your headband is ready to be worn.

scouringpadheadband_15-300x225

12. I love my “headband for less” I have a shirt that it matches perfectly with! And I am pretty sure that no one would ever guess the material I used to make this headband!

For more about the designer….

Download FREE Bowdabra App

We'd love to hear what you think, please leave a comment!