Archives

Bowdabra New Year’s Eve Confetti Holders

Ring in the New Year with Bowdabra’s New Year’s Eve confetti holders. Easily create these handmade confetti holders. At the stroke of mid-night open the holders and send confetti streaming through the air.

Materials Needed:
”¢ Mini Bowdabra ®
”¢ Bowdabra ® Bow Wire
Ӣ Letter Sized Cardstock
Ӣ Scissors
Ӣ Glue Dots or Hot Glue
Ӣ Chip Board & Gems
Ӣ Purple/Green Reversible Satin 3/8
Ӣ Scrap Ribbon

Instructions:

1. Use a standard letter size piece of cardstock.

2. Next, fold the two bottom edges in. Similar to if you were going to be making a paper airplane.

Bowdabra New Year’s Eve Confetti Holders

3. Roll the paper together keeping the folds inside. The two points should meet. Glue the points together.

How to make Bowdabra New Year’s Eve Confetti Holders

4. Next glue along the outside fold to keep the cone together.

New Year’s Eve Confetti Holders tutorial

5. Fill the cone with confetti and press the front edge in.

DIY Confetti Holders Ideas

6. Fold the other edge down and glue dot in place. (The edge can still be lifted with the glue dot when it is time to throw the confetti.)

Handmade confetti holders craft ideas

7. Attach ribbon, chipboard, and gems on the front of the confetti holder. Personalize each holder with names and dates or simply add ”œHappy New Year”.

perfect DIY bow for confetti holder

8. To make the little bow for the confetti: Cut a 18” piece of Bowdabra Bow Wire and fold it in half. Lay it into the Mini Bowdabra. You’ll have a loop at one end and two loose pieces at the opposite end.

Bow maker tool

9. Dovetail the end of a ribbon strip. Seal the ends with nail polish. Place it into the Mini Bowdabra.

how to make a bow

10. To make the loops of the bow, begin by placing the end of the ribbon into the center of the Mini Bowdabra.

Bow making ideas

11. Decide how big you want your loops. To make your first loop fold, twist, and press into the Mini Bowdabra.

Bow making tutorial

12. Fold the loop on the other side. Trim ribbon from the spool.

step by step bow making tutorial

13. Scrunch ribbon down with the Mini Bowdabra Wand.

step by step bow making Ideas

14. While the bow is still in the Mini Bowdabra, thread the two loose ends of the Bowdabra Bow Wire through the loop at the other end.

DIY bow for confetti holder on New Year’s Eve party

15. Pull the Bowdabra Bow Wire tightly while the bow is still in the Mini Bowdabra.

16. Gently pull the bow out of the Mini Bowdabra. Separate the two loose ends of the BowdabraBow Wire and bring them around to the back of the bow. To tie off the bow, pinch the BowdabraBow Wire securely against the bow. Twist the bow 4 to 6 times in a clockwise direction.

Bowdabra tool

17. Fluff bow.

How to make Bowdabra New Year’s Eve Confetti Holders

18. Glue the bow onto the top of the confetti holder.

19. Follow the instructions to make several confetti holders for New Year’s Eve.

 

Download FREE Bowdabra App

We'd love to hear what you think, please leave a comment!