Archives

{Craft Organization} How to Make a Wooden Ribbon Rack Holder

Craft organization is key, especially when you are crafting in a small space. I made a wooden ribbon rack holder to hold and organize all my spools of ribbon. I bought the wood, dowels, and hardware at my local hardware store. The best thing about going to your local hardware store is they will often cut the wood to length for you.

First, I asked them to cut a 1″ by 10″ in half for me. The half cut gave me the sides. Please note a 1″ by 10″ is actually 3/4″ x 9-1/4″ – one of life’s little mysteries. Next, I asked them to cut the bottom and top for me. I need the bottom and top to be 34″ long. I purchased 36″ oak dowels which gives an inch sticking out on either side.

Using a drill bit I drilled holes into the wood where I wanted to place my dowels. I clamped the wood together and drilled the holes so that I would be sure they would meet evenly. I place larger holes at the bottom for large heavy spools of ribbon. And smaller holes using thin width dowels for the top.

Once all my holes were done I just framed it using L-brackets.

{Craft Organization} How to Make a Wooden Ribbon Rack Holder

{Craft Organization} How to Make a Wooden Ribbon Rack Holder

 

I then inserted the dowels and added the ribbon spools. If the ribbons spools are too heavy for the oak dowels you can use metal rods but it is more expensive and harder to cut.

{Craft Organization} How to Make a Wooden Ribbon Rack Holder

{Craft Organization} How to Make a Wooden Ribbon Rack Holder

 

DIY Wooden Ribbon Rack Bowdabra

Wooden Ribbon Rack Bowdabra Tutorial

Download FREE Bowdabra App

One thought on “{Craft Organization} How to Make a Wooden Ribbon Rack Holder

  • We'd love to hear what you think, please leave a comment!